Victon WiFi Extender Setup

Victony WiFi Extender Setup: Your everyday internet speed issues are solved by Victony Extender. Your WiFi speed gives you more out of it. It’s a completely wireless device and it’s fairly easy to set up, making this device less hectic. It provides an unparalleled WiFi range due to its 4 antennas. It can go with just about any router. It has 3 impressive ‘Repeater/AP/Router’ modes. Place this extender in a suitable position and enjoy the in-home/office high-speed internet. 

The victony Extender  setup device has the following techniques. So let’s begin with the setup process.

Victon WiFi Extender Setup via WPS:

1. First of all, plug in the Victony WiFi Extender Setup near your router. For a faster connection, it is proposed to put them in the same room. 
2. Wait until the power LED turns solid and the extender stays stable. 
3. Press and hold the WPS button on the winning repeater for a few seconds or so. 
4. Go through the same process above with a router. 
5. The stable lights on both devices will now begin to blink for about 15-20 seconds and will eventually stop. That confirms the successful configuration of Victony extender. 
6. Light is going to turn stable again on your Victony Extender. If not then reset the extender and try the same process again. 
7. Here’s the time to unplug your extender and put it within the range of the router wherever you want to place it. 
8. Your extender will pop up with the same password as your router on your WiFi list. Without any buffer, connect and start streaming. 

Victon Wi-Fi Extender Setup Via Browser:

First, place the Victon WiFi Extender Setup with the connectivity problem and your router in the middle of the place. It is not mandatory to plug in your extender near your router in this case. 

• It is essential to get half a percent of the signals to the Extender from a router. 
• Start your extender now and push the ‘extender or repeater’ mode button. 
• Wait until the Power LED is stable and green to turn 
• Take your phone/tablet/laptop and select the Victony-extender-XXX network and go to the WiFi settings. It’s going to be an open, passwordless network, so connect to it. 
• It will show no internet when it gets connected and will now open your browser. 
• type Ap.Setup login 192.168.10.1 the Setup page of Victony Extender.
• You’ll be asked to fill out your username and password. In both, type ‘admin’. 
• Choose the network you want to extend and enter a new password when it asks you to select the type of network to be extended. 
• It would take approx 1 minute to reboot the system after updating the settings and after that you can connect to the devices.
• Go to WiFi settings and connect your device and start enjoying a high-speed internet with Victony Extender.

Victony Extender Setup as access point:

This could be the best option to choose for access point setup if you are okay to use a 20-foot ethernet cable or if an ethernet cable is already installed in the walls. You have to wonder why this is the best option to pick? Because that gives you more speed than the options for WiFi. Make sure to switch to Access Point mode prior to getting started. Let’s get started with this setup now. 

1. Victony Extender plugin for the location you want to use. 
2. Connect the ethernet cable from your repeater’s LAN port to your router after the plugin. 
3. Open your phone/tablet/laptop WiFi settings and connect to the WiFi list of the Victory Extender network. 
4. Open your browser on the same device when it gets connected. address bar type 192.168.10.1or http:/ap.setup. 

5. As the Victony WI-FI Extender Setup Wizard, a new page will open. 
6. You will also be asked to type your username and password. In both, type ‘admin’. 
7. In the next setup, the mode will be requested, Access Point Mode will be selected, and the next button will be hit. 
8. Create your new password, SSID, and your Access Point security type. 
9. It will reboot itself after all this process. take about a minute.
10.  You can now connect to your equipment after a reboot. Since Dual Ethernet Port is supported by Victony Extender, you can connect more devices and start enjoying seamless streaming and unhindered work.